Hotkey Setting Mode (HSM)
Function Description
Press and hold [Num Lock]1.
Press and release [-]2.
Release [Num Lock]3.
Invoking hotkey setting mode
Note: To exit HSM manually, press Esc or spacebar.
Invoke HSM, then press [h] Change the HSM invocation keys from [Num Lock] to [Ctrl] and
from [-] to [F12]
Invoke HSM, then press [t] Switch port switching hotkey sequence between [Scroll Lock]
[Scroll Lock] and [Ctrl] [Ctrl]
Invoke HSM, then press [F1] Set keyboard operating platform to PC compatible
Invoke HSM, then press [F2] Set keyboard operating platform to Mac compatible
Invoke HSM, then press [F3] Set keyboard operating platform to Sun compatible
Invoke HSM, then press [F5] Perform keyboard / Mouse reset on the port that has KVM focus.
Note: You can also press and hold Port 1 and Port 2 front panel
push button to perform keyboard / mouse reset.
To Next Page
Loading...
