30
To change the volume associated with a given pad:
1. Press the pad (the display will show the pad number).
2. Enter the desired volume, from 00 (full off) to 99 (maximum volume), with the number or
INC/DEC buttons.
3.When the display confirms your choice, either store the edits you've made (see section 4.8)
or do more assignments by tapping another pad to select it, then assigning the pad volume.
4.4 PAGE 4: SET PAD STEREO POSITION (PANNING)
The display shows PANNING, the currently selected pad number, and the pan position
assigned to that pad. (Note the cute little arrows indicating pan position; they move when you
pan the drum sound.)
PAGE
PANNING
<>
DRUM SET
DRUM
To change the pan position associated with a given pad:
1. Press the pad (the display will show the pad number).
2. Enter the desired pan position, from full left to full right, using either the number or INC/DEC
buttons. The seven available pan positions correspond to the number buttons shown in
parenthesis: hard left (1), soft left (2), left of center (3), center (4), right of center (5), soft right
(6), and hard right (7).
3. When the display confirms your choice, either store the edited Drum Set (see section 4.8) or
do more assignments by tapping another pad to select it, then assigning the pan position.
Background The IDM01 has two pairs of stereo outputs. Drum sounds can be assigned to either pair of outputs
(Page 7), and be placed anywhere within the stereo field of the assigned outputs via the pan function.
When heard from the drummer's perspective, the high-hat will usually be on the left, snare and kick in the center,
and toms trailing from left-center to right. Of course, one of the advantages of electronic drum sets is that you
need not follow any standard way of placing drum sounds in the stereo field.
To Next Page
Loading...
Need help?
General
