20
Troubleshooting:
Please contact ION Audio or your retailer before returning
this product. See the Safety Guide for more information
• NO SOUND:
o If you are not getting any sound into the software
application, go back to the preferences as shown
above and make sure you have selected the USB input
for the recording device.
o If you can not hear the music but you do see the
music on the screen, open your preferences (Figure 2)
and make sure that your “Playback Device” is set to
your internal computer soundcard.
o Power Cycle: Close Audacity, turn off the turntable,
unplug the USB Cable. Then plug in the USB Cable,
turn on the turntable, and reopen Audacity.
o Check the microphone slider to make sure that it is at full
volume, all the way to the right as shown in Figure 17:
Figure 17: Input Level
<CONTINUED ON NEXT PAGE>
To Next Page
Loading...
Need help?
General
