5 6
TA750
GETTING READY
Locate a level surface on which to place your Ionic Pro® Platinum near a
grounded 120v outlet. Position your Ionic Pro® Platinum at least one foot from
the wall. Follow warnings described in the “SAFETY INSTRUCTIONS” section
of this manual.
Plug in the unit. You are now ready to turn on your Ionic Pro® Platinum!
CONTROLS/SETTINGS
TIMER
Timer is programmable up to 24 hours.
MODE BUTTON
SILENT
Recommended for bedrooms or other quiet places.
At this setting the unit will run at low speed with whisper-quiet operation
GERM
Recommended for when germs are a concern.
ALLERGY
Recommended for allergen removal.
MAX
Recommended for maximum smoke and dust removal.
DIM
Allows you to dim the control panel lights.
CLEAN FILTER
This blue light goes on when the Ionic Pro® Platinum needs to be cleaned, or the
unit is experiencing some other problem. See the “CLEANING & MAINTENANCE”
and the “TROUBLE-SHOOTING” sections of this manual for more information.
NOTE: It is recommended to clean the permanent ionic filter every 8 weeks.
ON/OFF BUTTON
Turns the unit on and off and controls the fan speed.
SELECTING A SETTING
Set up the Ionic Pro® Platinum as described in the “GETTING READY” section of
this manual. Push the ON/OFF button to activate the Ionic Pro® Platinum.
Select the desired fan speed by pushing the MODE button.
The different settings are SILENT mode, GERM mode, ALLERGY mode, and MAX
mode. Push the button to cycle through the settings. The LED indicators will light
up to indicate your current setting.
OPERATING THE PLATINUM OPERATION
Control Panel
Figure 2
To Next Page
Loading...
