To Next PageTo Next Page
Need help?Do you have a question about the iOptron CEM120 7300 and is the answer not in the manual?
General| Mount Type | Equatorial |
|---|---|
| RA Worm Gear Material | Brass |
| DEC Worm Gear Material | Brass |
| Counterweight Shaft Diameter | 28 mm |
| Resolution | 0.07 arcsec |
| Tripod | Optional |
| Mount Weight | 57 lbs (26 kg) |
| Latitude Adjustment Range | 0° to 60° |
| Motor | Stepper Motor |
| Power Requirement | 12V DC 5A |
| Hand Controller | Go2Nova 8407+ |
| Database | Built-in celestial object database |
| GPS | Built-in |
| Communication Port | RS-232, USB |
| Weight | 26 kg |
Explains the function and operation of the gear switch and axle locking knob for safe mount handling.
Covers attaching the mount to the tripod/pier and securing it with base screws.
Details installing the counterweight shaft and setting the mount's latitude.
Guides on installing counterweights and the telescope onto the mount.
Explains payload balancing and connecting power, controller, and antennas.
Explains polar alignment procedures and initial controller setup for time and site.
Covers manual slewing, GoTo operations, and alignment methods like Zero Position.
Provides guidance on safely dismounting and transferring the mount.
