Need help?Do you have a question about the iOptron GEM28 and is the answer not in the manual?
General| Payload Capacity | 28 lbs (12.7 kg) |
|---|---|
| Mount Weight | 10.4 lbs (4.7 kg) |
| RA Worm Gear Material | Brass |
| DEC Worm Gear Material | Brass |
| Tracking Rate | Sidereal, Lunar, Solar |
| Autoguiding Port | Yes |
| Communication Port | USB |
| Tracking Accuracy | ± 5 arcsec |
| Weight | 10.4 lbs (4.7 kg) |
| Mount Type | Equatorial |
| RA Worm Wheel | 180 teeth |
| DEC Worm Wheel | 180 teeth |
| Motor Drive | Stepper motor |
| Power Requirement | 12V DC |
| GPS | Built-in |
| Polar Scope | Yes, included |
| Counterweight Shaft | Ø20 mm |
| Worm Gear Period | 600 seconds |
Step-by-step guide to assembling the mount head onto the tripod.
Instructions for installing the counterweight shaft, counterweight, and telescope.
Procedures for balancing the payload and connecting the necessary cables.
Guides on setting time, site, GPS, and other parameters in the hand controller.
Detailed steps for performing polar alignment using various methods.
Explains how to set and verify the mount's Zero Position.
Covers One, Two, Three Star Align, Polar Iterate Align, and Solar System Align.
To Next Page
