22
6.5. Set Up Controller
6.5.1. Set Up Local Time
Refer to 4.2.1.
6.5.2. Set Up Site
Refer to 4.2.1.
6.5.3. Set N/S Hemisphere
Set northern or southern hemisphere.
6.5.4. Set Display Contrast
Use arrow keys to adjust LCD display contrast.
6.5.5. Set Eyepiece Light
If you have an illuminated-reticule eyepiece or illuminated polar scope, and it is
supported by GoToNova hand controller-- use this option to adjust the light intensity.
6.5.6. Set Backlight
Adjust LCD and keypad backlight.
6.5.7. Set Anti-backlash
Use Array Keys to move the cursor and Number Keys to change the number. 0 is
suggested for Alt/Azi mount. For an EQ mount, the default setting is 150 for both DEC and R.A.
6.5.8. Set Key Beep
Turn the key beep on/off.
6.5.9. Set Mount Type
Set the mount as Equator Mount or Alt/Azi Mount.
6.5.10. Reset All
Reset all settings to factory default data.
6.5.11. Update Firmware
Firmware updating using iOptron Downloader through USB port on hand controller.
(Refer to Appendix E.)
6.5.12. Set gear ratio
Not supported.
To Next Page
Loading...
Need help?
General
