34/39
D. Event List
IP Vandal Dome provides multiple event settings.
i、 Event Setting
a. Motion Detection
IP CAMERA allows 3 areas motion detection. When motion is
triggered, it can send video to some specific mail addresses,
transmit video to remote ftp server, trigger the relay, and save video
to local SD card. To set up the motion area, click “Area Setting”.
Using mouse to drag and set the area. The same operation for area
2 and 3.
b. Record Time Setting：Pre Alarm and Post Alarm setups for video
start and end time when motion detected, I/O, or other devices got
triggered.
c. Network Dis-connected
When the network is down, it will save the video to local SD card.
This function is only enabled in wire connection.
To Next Page
Loading...
