IPC Gansow CT 80 BT 55 - Emptying the water;detergent tank; Filling the water;detergent tank

GB
Emptying the water/detergent tank
To empty the tank, follow the instructions shown below:
► Switch off all the machine’s functions.
► Take the machine to the disposal area.
► Stop the machine.
► Empty the tank by unscrewing the plug (g. 14).
Filling the water/detergent tank
Fill the tank through the opening provided (g. 15). The machine is equipped with a graduated
measuring cap that can be used to dilute the detergent inside the tank. If the tank is empty, the dis-
play shows the corresponding alarm, see “Display alarms” . The quantity of water/detergent in the
tank can be checked using the level tube on the side of the machine (g. 15).
0,500 Lt
0,400 Lt
0,250 Lt
0,100 Lt
-1
-3/4
-1/2
-1/4
CHEMICAL
15
14
0,500 Lt
0,400 Lt
0,250 Lt
0,100 Lt
CHEMICAL
24