IPC Gansow Ct100 User Manual

1
CT100 Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual.
Before using the machine, read the Use and Maintenance Manual contained in the machine packaging thoroughly and
rigorously respect all the instructions.
PREPARATION/OPERATION
Fill the detergent tank.
Release the emergency button to turn the
machine on.
Hold the automatic brush attachment button
down until they are attached.
Release the parking brake by pressing the
pedal downwards and to the left.
Operate the drive lever. Pull it upwards to move
the machine forwards, push it downwards to
move the machine backwards.
Open/adjust the detergent tank tap.
Adjust the pressure of the brushes on the work
surface using the button. The lit LEDs indicate
the level of pressure.
Lower the squeegee using the lever.
Begin working.
Turn the potentiometer to set work speed.
Whenyouhavenishedcleaning,proceedas
follows:
• Raise the squeegee.
• Raise the machine head.
• Press the emergency button.
• Close the detergent tank tap.
• Put the parking brake on by pressing the
pedal downwards and to the right.
• If necessary, charge the batteries.
Insert the brushes under the head, making sure
they rest against the aligners.
DAILY MAINTENANCE
Empty the dirty water drum through the drain
hose.
Clean the dirty water tank with water or water
and detergent.
PLDC01855

IPC Gansow Ct100 Specifications

General

Brand	IPC Gansow
Model	Ct100
Category	Scrubber
Language	English

Summary

Preparation and Operation

Machine Start-up and Adjustment

Steps for filling the detergent tank, turning on the machine, setting speed, and attaching brushes.

Cleaning Operation and Shutdown

Procedure for lowering the squeegee, commencing work, and shutting down the machine safely.

Daily Maintenance

Water System Cleaning

Instructions for emptying the dirty water drum and cleaning the water tank.

Component Checks and Maintenance

Filter and Squeegee Inspection

Procedures for checking suction, detergent, and squeegee filters and blades.

Brush Attachment and Release

Instructions for attaching and releasing the machine brushes.

Squeegee Blade Replacement

Detailed steps for replacing or reversing squeegee blades.

Troubleshooting Common Issues

Machine Not Starting or Suction Motor Failure

Checks for power-on issues and suction motor problems.

Floor Cleaning Performance

Troubleshooting for wet floors, dirty floors, or floor stripes.