GB
Manual cleaning of the panel lter:
! DANGER!
This operation must be performed with the machine switched off and the key removed.
If the action of the lter shaker proves insufcient, proceed as follows to clean the lter manually.
► Remove the lter compartment cover.
► Lift the two levers and remove the lter shaker bracket complete with the lter shaker mo-
tor, carefully disconnecting the power cable from the lter shaker (g. 23).
► Remove the suction lter (g. 23).
► Blow the lter clean with compressed air (maximum pressure 6 bar).
! IMPORTANT!
The lter is marked to show the correct direction for tting.
Manual cleaning of the pocket lter:
! DANGER!
This operation must be performed with the machine switched off and the key removed.
If the action of the lter shaker proves insufcient, proceed as follows to clean the lter manually.
► Remove the lter compartment cover.
► Unscrew the four screws securing the two lter holder brackets (g. 24).
► Remove the two brackets (g. 24).
► Remove the lter, carefully disconnecting the power cable from the lter shaker (g. 24).
► Blow the lter clean with compressed air (maximum pressure 6 bar).
23
24
31