GB
Fuses: replacing
! DANGER!
This operation must be performed with the machine switched off and the key removed.
! WARNING!
Never use a fuse with a higher amperage than specied.
If a fuse continues to blow, the fault in the wiring, boards (if present) or motors must be identied
and repaired. Have the machine checked by qualied personnel.
Regulator fuse (1, g. 25), lter shaker and ashing beacon fuse (2, g. 25), hour counter and horn
fuse (3, g. 25), Petrol and Diesel versions.
(g. 26) Main fuse .
Manual reset cutouts for side brush motors (g. 27), Battery and Dual Power versions.
Filter shaker and suction fan fuse (1, g. 28), central brush motor fuse (2, g. 28), Battery and Dual
Power versions.
Battery maintenance and charging
! DANGER!
Do not check the batteries by sparking.
The batteries give off ammable fumes. Put out all res and hot embers before checking or
topping up the batteries.
Perform the operations described below in a ventilated area.
25 26
27
28
32