GB
GENERAL INFORMATION
Purpose of this manual
This manual has been written by the Manufacturer and is an integral part of the machine1.
It denes the purpose for which the machine has been designed and constructed and contains all
the information required by operators2.
In addition to this manual, which contains information for operators, other publications are available
providing specic information for maintenance personnel3.
The terms “right” and “left”, “clockwise” and “anti-clockwise” refer to the forward movement of the
machine.
Constant compliance with the instructions provided in this manual guarantees the safety of the op-
erator and the machine, ensures low running costs and high quality results and extends the working
life of the machine. Failure to follow these instructions may lead to injury to the operator or damage
to the machine, oor and environment.
Consult the table of contents at the beginning of the manual to nd the section you need rapidly.
Parts of the text requiring special attention are printed in bold and preceded by the symbols illus-
trated and described here.
! DANGER!
Indicates the need for attention in order to avoid a series of consequences which could cau-
se death or serious injury to personnel.
! WARNING!
Indicates the need for attention in order to avoid a series of consequences which could
cause injury to personnel or damage to the machine or work environment or nancial loss.
! IMPORTANT!
Important information.
In line with the company’s policy of constant product development and updating, the Manu-
facturer reserves the right to make modications without prior notice.
Although your machine may differ appreciably from the illustrations in this document, the
correctness and validity of the instructions contained in this manual are guaranteed.
Identifying the machine
The nameplate provides the following information:
► Model
► Battery voltage
► Total rated power
► Rated current draw
► Serial number
► Year of manufacture
► IP Index of Protection
► Dry weight
► Maximum negotiable gradient
► Name of manufacturer
1 The term "machine" replaces the trade name of the machine described in this manual.
2 Persons responsible for operating the machine but not for performing maintenance operations requiring special
technical skills.
3 Persons with technical experience, training and a knowledge of applicable legislation and standards, able to perform
all necessary operations and to recognise and avoid possible risks in handling, installing, operating and maintaining the
machine.
9
To Next Page
Loading...
