Need help?Do you have a question about the iPECS ES-3052GP and is the answer not in the manual?
General| Ports | 48 |
|---|---|
| PoE Ports | 48 |
| PoE Budget | 370W |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.4 Mpps |
| Weight | 3.8 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| SFP Ports | 4 |
| MAC Address Table Size | 16K |
| VLANs | 4K |
| Operating Temperature | 0 to 50 °C |
| Layer | Layer 2+ |
| Jumbo Frame | 9K Bytes |
| Humidity | 10% to 90% (non-condensing) |
Covers connecting to the switch and performing basic configuration procedures.
Explains how to access and navigate the switch's embedded HTTP web agent.
Covers displaying system information, hardware/software versions, and managing system files.
Details port configuration, mirroring, trunking, saving power, traffic segmentation, and VLAN trunking.
Explains configuration of static/dynamic VLANs, QinQ tunneling, protocol VLANs, IP subnet VLANs, MAC-based VLANs, and VLAN mirroring.
Covers setting static MAC addresses, changing aging time, displaying dynamic address tables, and clearing them.
Describes loopback detection, global settings, and interface settings for STP, RSTP, and MSTP.
Details rate limiting, storm control, and automatic traffic control mechanisms.
Explains Layer 2 queue settings, including default priority, queue mode, and weights.
Covers QoS policies, class maps, policy maps, and binding policies to ports.
Details global settings, telephony OUI list, and port settings for VoIP traffic.
Covers AAA, user accounts, web authentication, network access, HTTPS, SSH, ACLs, ARP inspection, IP filtering, port security, and IP source guard.
Covers IP interface configuration, ARP configuration, and IPv6 interface configuration.
Explains how to access and use the command line interface (CLI) for switch management.
Lists and describes common CLI commands for basic switch operations and navigation.
To Next Page
