What to do if IPG Photonics Measuring Instruments show Pulse Too Short error?
If your IPG Photonics Measuring Instruments display a 'Pulse Too Short' error, click Warning in the touch-screen display and read the warning message. Try to reset the error. If it appears again, contact IPG Photonics for assistance.
What to do if IPG Photonics Measuring Instruments show Critical Error?
If your IPG Photonics Measuring Instruments show a 'Critical Error', it means that the system has detected an error that is considered critical. Neither reset command (“RERR”) nor restart of the device clears this error. Contact IPG Photonics for assistance and be ready to provide the Module Error Code (RMEC command).
How to fix Optical Interlock error on IPG Photonics Measuring Instruments?
If the Optical Interlock error appears on your IPG Photonics Measuring Instruments, it indicates that either the delivery fiber cable is mechanically damaged or the output connector is not properly connected to an appropriate optical head. Send the reset error command (“RERR”). If the message persists, contact a representative from IPG Photonics for assistance.
Why do IPG Photonics Measuring Instruments show Low Temperature error?
If your IPG Photonics Measuring Instruments display a 'Low Temperature' error, it means the case temperature of the laser is too low. This message will disappear as soon as the case temperature of the laser module rises into the operating range.
General| Wavelength | 1070 nm |
|---|---|
| Output Power | 500 W |
| Cooling | Water-cooled |
| Polarization | Random |
| Beam Quality | M² < 1.2 |
| Mode of Operation | CW |
Details the laser classification and required safety eyewear.
Covers precautions for protecting eyes and optics from laser light.
Explains how to properly connect the laser to the power supply.
Differentiates between Local and Remote control modes.
Explains how to choose between CW and Pulsed (QCW) emission modes.
Lists and explains the commands for remote laser control.
Explains how to operate the main pulse shaping interface.
Details creating and editing custom pulse shapes.
To Next Page
