To install and use iPod Software 2.3 for iPod with dock connector you need:
• An iPod with dock connector
• A PC with a high power USB 2.0 port or card, or FireWire port or card
• Windows 2000 with Service Pack 4 or later, or Windows XP Home or Professional with
Service Pack 2 or later
• iTunes 4.7 or later
To install and use iPod software 1.5 for iPod with touch wheel or scroll wheel you
need:
• An iPod with touch wheel or scroll wheel
• A PC with a FireWire port or a FireWire card
• Windows 2000 with Service Pack 4 or later, or Windows XP Home or Professional with
Service Pack 2 or later
• iTunes 4.7 or later
Choosing Update or Restore
iPod Update 2005-09-06 has two functions, Update and Restore.
• Update: If you choose Update, the software on your iPod is updated with the new
version of software. Songs and other data on iPod are not affected. If your iPod already
has up-to-date software, the Update choice is not available.
• Restore: If you choose Restore, the entire contents of iPod are erased, all iPod settings
are reset, and new software is installed.
WARNING: Choosing Restore erases all of the music and other data on iPod.
Using iPod Updater 2005-09-06
To install and open the iPod Updater:
1. Open iPodsetup.exe on the iPod CD or from the web download.
2. Connect your iPod to your computer. If you are using USB, make sure iPod is
connected to a high power USB port on your computer. Be aware that USB keyboards
and non-powered USB hubs generally do not have high-power USB ports.
3. Run Updater 2005-09-06 from Start\All Programs\iPod\iPod Updater 2005-09-06.
4. When iPod Updater opens, click Update or Restore.
©2005 Apple Computer, Inc. All rights reserved.
Apple, the Apple logo, FireWire, iPod, and iTunes are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
Updated August 15, 2005
To Next Page
Loading...