iPod nano - Reset

14 Using iPod
To Do This
Reset iPod
(For use during troubleshooting)
Toggle the Hold switch (set it to Hold, then turn
it off again). Then press the Menu and Select
buttons simultaneously for about 6 seconds, until
the Apple logo appears.
Turn on iPod Press any button.
Turn off iPod Press and hold Play/Pause.
Turn the backlight on or off Press and hold Menu or select Backlight from the
main menu.
Select a menu item Scroll to the item by moving your thumb lightly
around the Click Wheel, then press the Select
button.
Go back to the previous menu Press Menu.
Browse for a song Select Music from the main menu.
Play a song Highlight the song and press the Select or
Play/Pause button. iPod must be ejected from
your computer to play songs.
Play all the songs in a list Highlight the list title (an album title, or the title
of a playlist, for example) and press Play/Pause.
Change the volume From the Now Playing screen, use the Click Wheel.
You can also use the optional iPod Remote
(available at www.apple.com/ipodstore) from any
screen.
Pause a song Press Play/Pause when no song or list is
highlighted.