What to do if iPower GXS4300iDC Portable Generator engine is running, but no AC output is available?
If the iPower Portable Generator engine is running but there's no AC output, the AC circuit breaker might be open. Check the AC load and reset the circuit breaker.
Why iPower Portable Generator engine shuts down when running?
The iPower Portable Generator engine might shut down while running because it is out of fuel, the air cleaner is dirty, or the oil level is low. It could also shut off due to CO accumulation, indicated by a blinking red light. Fill the fuel tank, clean or replace the air cleaner, and ensure the crankcase is filled to the proper oil level, placing the generator on a level surface. Also, follow all safety instructions on the CO Action Label.
Why iPower GXS4300iDC engine lacks power?
The iPower Portable Generator engine may lack power if the load is too high, the air filter is dirty, the fuel filter is clogged, the spark arrester screen is clogged, or the fuel is bad. Reduce the load, replace the air filter, clean or replace the fuel filter and spark arrester screen, and drain the gas tank and carburetor, then fill with fresh fuel.
What to do if iPower Portable Generator engine runs well at no-load, but "bogs down" when loads is connected?
If the iPower Portable Generator runs well without a load but bogs down when a load is connected, there might be a short circuit in the connected load. Disconnect the shorted electrical load. Additionally, try reducing the load, cleaning or replacing the fuel filter, and connecting another device that is in good condition.
How to fix iPower Portable Generator engine that “hunts” or falters?
If the iPower Portable Generator engine “hunts” or falters, the fuel filter might be clogged or dirty. Try replacing the fuel filter. Also, the choke might be opened too soon; set the choke to the halfway position until the engine runs smoothly.
General| Model | GXS4300iDC |
|---|---|
| Starting Wattage | 4300 W |
| Running Wattage | 3500 W |
| Fuel Type | Gasoline |
| Engine Type | 4-Stroke OHV |
| Outlets | 2 x 120V 20A |
| Starting Method | Recoil/Electric |
Emphasizes manual reading, safety warnings, and definitions.
Details CO dangers and proper ventilation for generator use.
Covers electric shock, hot surfaces, and moving parts hazards.
Identifies key external controls and features of the generator.
Explains the control panel layout, indicators, and outlets.
Details the LED Multi-Meter, Low Idle button, and Overload Reset button functions.
Lists specifications like wattage, voltage, engine displacement, and certifications.
Explains CO detection, automatic shutoff, and proper placement.
Describes the meaning of blinking red and yellow indicator lights.
Warns against modifying the CO system and potential warranty voiding.
Recommends oil type and details the procedure for checking the oil level.
Details safe fueling practices and required gasoline specifications.
Guides on connecting LPG hose, safety checks, and cylinder handling.
Explains how the generator automatically switches between fuel types.
Discusses performance impacts of altitude and available adjustments.
Explains the necessity of grounding for electrical safety.
Details proper site selection, ventilation, and setup for operation.
Step-by-step guide for starting the generator.
Instructions for starting the generator using gasoline.
Instructions for starting the generator using propane/LPG.
Guides on connecting and applying electrical loads to the running generator.
Explains the function and usage of the Low Idle switch.
Detailed procedure for safely shutting down the generator.
Explains automatic shutdown triggers for low oil or overload conditions.
Steps to switch from gasoline to propane/LPG fuel.
Steps to switch from propane/LPG to gasoline fuel.
Instructions for connecting two generators for increased power.
Outlines regular maintenance intervals and general recommendations.
Details the visual inspection steps before operating the generator.
Step-by-step guide for checking the engine oil level.
Instructions on how to drain and refill the engine oil.
Steps for cleaning and reinstalling the air filter element.
Guidance on inspecting, cleaning, and gapping the spark plug.
Provides valve clearance specs and notes adjustment needs authorized service.
Instructions for cleaning the spark arrestor screen.
Advice on cleaning the generator's exterior and air vents.
Recommendations for both short-term and long-term storage.
Step-by-step process for draining the carburetor float bowl.
Common issues with engine operation, power output, and their solutions.
Addresses problems related to engine starting, fuel supply, and system faults.
Diagram showing the location of various generator components.
Detailed list of parts, part numbers, and quantities.
Illustrates the electrical connections and components of the generator.
Details warranty coverage, term, and conditions for residential/commercial use.
Lists what is NOT covered by the warranty and specific limitations.
Covers consequential damages, legal rights, and merchandise return procedures.
Instructions and form for registering the product for warranty purposes.
To Next Page
