ifiver
Chapter2 Basic Operations
Connecting Products
|
Connecting earphones to the iriver clix
|
1 . Connect the earphones to the jack of the product.
0
r
ifiverclix
i
|
Charging the Battery
|
1 . Turn on your PC and connect the iriver clix to it
using the USB cable.
13
While the product is connected to PC using the USB cable,
the integrated battery is will be charged automatically.
Do not use any other USB cable that is not provided with
the product. It may case a malfunction.
Check if the iriver clix is connected to a high-power USB 2.0
port. Some low-power USB ports built in some peripheral
devices such as certain keyboards and USB hub without
integrated power may not provide enough power to charge.
While the PC is switched to standby mode, the
product may not be charged.
Charge the product only in room temperature. The product
may not be charged in extremely hot and cold place.
The available usage time of charged battery becomes
gradually short after sometime.
It will be fully charged within 2.5 hours. (Based on fully
discharged and stop mode)
If you use the player during charging process, the charging
time might be extended.
Basic
Operations
|
Connecting
Products
To Next Page
Loading...
