IRiver CLIX - Upgrading Firmware with iriver plus 3; Using Windows Media Player 11

Other
Information
|
Using
iriver
plus
3
ifiver
Chapter5 Other Information
36
Using
iriver
plus
3
|
Initializing Disk
|
1
. After connecting the product to the USB jack of
your PC using the USB cable, run iriver plus 3.
2. Select [Tools
>
Portable Device
>
Initialize Disk]
and click [Start] when the message to confirm
initialization appears.
3. The initialization process is completed and the
product
is
disconnected from your PC.
UQy
You
need
to
backup the necessary files before
initialization as formatted files cannot be recovered.
ifivercUx j
|
Upgrading Firmware
|
1 . After connecting the product to the USB jack of
your PC using the USB cable, run iriver plus. The
PC should be connected to internet.
2. Select [Tools
>
Portable Device
>
Firmware Upgrade]
and complete the upgrade process following the
on-screen instructions.
Do not disconnect the product from PC while downloading
firmware upgrade file. After the download is completed,
disconnect the cable to activate the firmware upgrade.
If the already installed firmware is the latest version,
the message to confirm latest version appears.
When connect the product to your PC, if there is latest
firmware, the instruction message appears automatically.