IRiver CLIX - Troubleshooting

ifiver
Chapter5 Other Information
Troubleshooting
|
Please check out!
|
•
The player will not power on!
-
Check whether the battery is discharged. Charge the
product using USB cable and check it again.
-
Insert a thin and pointed object (such as a straightened
paper clip) into the reset hole to reset the device.
•
The
product cannot
be
charged after connecting power.
-
Check whether the USB cable is firmly connected.
•
The product cannot
be
connected properly using the
USB cable.
-
Check whether the USB cable is firmly connected.
•
The LCD display is turned off frequently.
-
To save power consumption, the LCD is designed
to be
turned off after designated time.
Set up the duration in [Settings
>
Timer
>
Backlight].
•
Poor radio reception with heavy noise!
-
Check whether an earphone is connected. (The
earphones cord functions
as
an antenna.)
-
Adjust the position of the player and earphones.
-
Turn off any nearby electronic equipment to avoid
potential interference.
•
No sound during playback!
-
Check whether the volume is
set to
"0".
-
Check whether the plug or connection jack of
earphones is dirty.
-
Check whether the music file is corrupted.
43
•
The memory space is changed after formatting.
-
The memory
space
can
be
changed depending
on
the operating system.
•
Windows Media Player 11 cannot
be
installed.
-
Check whether
you
are currently using Windows® XP.
Windows Media Player 11 only supports Windows®
XP. If
you
are using other than Windows® XP,
transfer files using iriver plus
3
or removable disk.
Other
Information
|
Troubleshooting