IRiver E300 - Adding Media to the Library; Extracting Media from a CD; Transferring Media to the Product

10
Windows® Vista Specifications
(For Windows® Vista, note that only the 32-bit version will be supported.)
- Intel® Pentium® 800MHz or above
- Memory: 512MB or above
- 20MB or more free space
- 16 bit Sound Card and Speaker
- Microsoft Internet Explorer V 6.0 or above
- SVGA or high-resolution monitor (min. 1024x768 resolution)
Windows® 7 Specifications (For Windows® 7, note that only 32-bit version will be
supported.)
- 1GHz or above, 32-bit processor
- Memory: 1GB or above
- 16GB or more free space
- DirectX 9 Graphic Device with WDDM 1.0 higher Drive
- SVGA or high-resolution monitor (min. 1024x768 resolution)
- Maximum file size for transfer: 4GB.
1. When iriver plus 4 is first run, the Add Media Wizard will be executed.
2. According to the screen instructions, you can add to the library
media files such as music, and e-books stored in the computer.
Adding Media to the Library
1. Insert a music CD into the CD drive and execute iriver plus 4.
2. Select the music checkboxes you want to extract from [CD] tab in
iriver plus 4 and click [CD Ripping] at the bottom left.
3. When the music extraction is complete and [All Music] is selected,
you will see the extracted music files added to the library.
Extracting Media from a CD
1. Connect the product to your computer’s USB port and then
execute iriver plus 4.
Transferring Media to the Product
Getting Started