IRiver E300 - Important safety information; Relating to the Product; Others

27
Important
safety
information
- If the same screen is turned on for a long time, there may be an
after-image on the screen.
- Do not allow metal (coins, hairpins, etc.) or foreign substances that
burn easily to get inside the product.
- Do not place heavy objects on top of the product.
- If the product gets wet from rain, drinks, medicines, cosmetics, sweat,
or moisture, do not turn the power on, and after quickly wiping the
product with a dry cloth, go to the closest iriver service center and
get it checked. (Failure due to submersion will be charged regardless
of the warranty period, and repair may be impossible.)
- Do not keep in places where there is moisture, dust, or soot.
- Do not disassemble, repair, or modify.
- Do not keep in direct sunlight or places where the temperature is too
high or too low (-5C ~ 40 C).
- Do not keep next to magnets, TVs, monitors, speakers, or other
objects with strong magnetism.
- Do not use chemicals or cleaners on the product; they may degrade
the surface and cause damage to the finish.
- Do not drop the product, or subject it to strong impact or vibration.
- Do not press multiple keys simultaneously.
- Do not disconnect from USB cable when transmitting data.
- When connecting the product with a computer, use a USB port on
the back of the computer. Some generic computers with sub-
standard USB ports can cause damage to the product.
- Do not insert devices other than earphones in the earphone terminals.
- Images may appear darker when the screen is covered by an LCD
protective film or clear sticker.
Relating to the Product
- Do not use or handle headphones/earphones when driving a bicycle,
car, or motorcycle.
It is not only dangerous but can also be illegal according to the region.
- Do not use when driving, walking, or climbing.
Others
Other Information