Roomba
®
e5 Owner’s Guide 4
EN
Care and Maintenance Instructions
To keep your Roomba
®
robot vacuum running at peak
performance, perform the procedures on the following
pages.
There are additional instructional videos in the iRobot HOME
App. If you notice the robot picking up less debris from your
floor, empty the bin, clean the filter, and clean the brushes.
Care and Maintenance Overview
Care and Maintenance
Note: iRobot manufactures various replacement parts and
assemblies. If you think you need a replacement part, please
contact iRobot Customer Care for more information. Ask
Customer Care or visit an authorised iRobot
®
dealer.
* Replacement frequency may vary. Parts should be replaced
ifvisible wear appears.
Emptying the Bin
Open the bin door to empty the bin.
Press the bin release
button to remove the bin.
1
2
Place the bin back into the robot.
3
Cleaning the Filter
Release the bin. Remove the
filter by grasping both ends
and pulling out.
Shake o debris by tapping
the filter against your
household rubbish bin.
Reinsert the filter with the
ridged grips facing out.
Place the bin back into
the robot.
1
2
3
Important: The robot will not
run if the filter is not installed
correctly. Replace the filter
everytwo months.
Part Care Replace* Details
Bin Empty after each use Page 3
Filter Clean every week
(twice a week if you
have a pet)
Every 2
months
Page 3
Front Castor
Wheel
Clean every 2 weeks Every 12
months
Page 4
Edge-
Sweeping
Brush and
Multi-Surface
Brushes
Clean every month
(twice a month if you
have a pet)
Every 12
months
Page
4-5
Sensors and
Charging
Contacts
Clean once a month Page 5
To Next Page
Loading...
Need help?
General
