Roomba
®
900 Series Owner’s Guide 13
EN
• Behavior When Bin is Full: Roomba senses when its dust bin is full.
There are two options for what Roomba should do when the bin is full:
» Finish Job: Even if the bin is full, Roomba will continue cleaning
until it has covered the entire space. Once the bin is emptied,
Roomba is ready for a new cleaning job. The Full Bin behavior is
“Finish Job” by default.
» Pause Immediately: As soon as its bin is full, Roomba will return
to where it started and pause its cleaning job. Once the bin is
emptied, press CLEAN to resume.
Note:
• If the Full Bin indicator ( ) comes on at any time during a cleaning job,
you can always pause the cleaning job to empty the bin and then
continue cleaning.
• If the Full Bin indicator ( ) is illuminated but the bin does not appear
to be full, refer to page 22 for Full Bin sensor cleaning instructions.
To Next Page
Loading...
