18 Roomba
®
900 Series Owner’s Guide
EN
Dual Mode Virtual Wall Barriers
The Dual Mode Virtual Wall barrier (an optional
accessory) keeps Roomba in the places you want
to be cleaned — and out of the ones you don’t.
You can set your device to one of two modes to fit
your home’s cleaning needs:
Virtual Wall Mode: When the switch is in the
“up” position (
), the device functions as a
Virtual Wall. This means that you can set it to
block openings of up to 10 feet (3 meters).
It creates an invisible, cone-shaped barrier
that only Roomba can see.
Note: This barrier gets wider as it gets further
from the device (refer to illustration).
Halo Mode: When the switch is in the “down”
position (
), the device creates a protective
zone that Roomba will not enter. This prevents
Roomba from bumping into items you want to
protect (e.g. a dog bowl or vase) or crossing into
undesired areas (e.g. a corner or under a desk).
The Halo is invisible and reaches approximately
24 inches (60 centimeters) from the center of
the device.
10ft / 3m
4ft / 1.2m
To Next Page
Loading...
