Roomba
®
900 Series Owner’s Guide 31
EN
Radio Equipment Directive 2014/53/EU:
For Roomba 800 Series models containing RF module 4123659
and all Roomba 900 Series models.
ETSI EN 300 328 V1.8.1
Electromagnetic compatibility and Radio spectrum matters
(ERM); Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using
wide band modulation techniques; Harmonized EN covering
essential requirements under article 3.2 of the R&TTE Directive
ETSI EN 301 489-1 V1.9.2,
as modified by ETSI EN 301 489-17 V2.2.1
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Electromagnetic Compatibility (EMC) standard for radio
equipment; Part 17: Specific conditions for Broadband Data
Transmission Systems
EMC Directive 2014/30/EU
EN 55014-1:2006 + A1:2009 + A2:2011
Electromagnetic compatibility – Requirements for household
appliances, electric tools and similar apparatus – Part 1: Emission
EN 55014-2:1997 +A2:2008
Electromagnetic compatibility – Requirements for household
appliances, electric tools and similar apparatus – Part 2:
Immunity – Product family standard
EN 61000-3-2:2006 + A1:2009 + A2:2009
Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input current
≤ 16 A per phase)
EN 61000-3-3:2008
Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voltage changes, voltage fluctuations and flicker
in public low-voltage supply systems, for equipment with
rated current ≤ 16 A per phase and not subject to conditional
connection
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
To Next Page
Loading...
