Roomba
®
i5+ Owner’s Guide 5
EN
Care and Maintenance Instructions
To keep your dirt disposal running at peak performance, follow these
care procedures:
Part Care frequency Replacement frequency
Bags - Bags should be replaced
when prompted by the LED
indicator/app.
Charging Contacts
Visual Docking
Target
Once every month -
Blower Cover
inside canister
Once every month (remove
debris from blower cover)
-
Bin Wash bin as needed -
Filter Clean once a week (twice
a week if you have a pet).
Do not wash.
Every 2 months
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping
Brush and
Multi-Surface
Brushes
Clean once a month
(twice a month if you
have a pet)
Every 12 months
Sensors and
Charging Contacts
Clean once a month -
Care and Maintenance
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
Emptying the Bin
Open bin door to empty bin.
Press the bin release
button to remove bin.
1
2
Place bin back in the robot.
3
Cleaning the Filter
Remove the bin. Remove the
lter by grasping both ends
and pulling out.
Remove debris by tapping the
lter against your rubbish bin.
Reinsert lter with ridged
grips facing out. Place bin
back in the robot.
1
2
3
Important: The robot will not run
if the lter is not installed cor-
rectly. Replace the lter every
two months.
To Next Page
Loading...
Need help?
General
