6 For more information, visit global.irobot.com
EN
Washing the BinCleaning the Full Bin Sensors
Wipe the inner sensors with a
clean, dry cloth
Make sure the bin is completely dry.
Reinsert lter and place bin back in
the robot.
Wipe the bin door with a clean,
dry cloth.
2
3
3
Important: Do not wash the lter. Remove the
lter before washing the bin.
Release the bin, remove the lter, and
open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
in place.
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Cleaning the Edge-Sweeping Brush
1
2
Rinse the bin using warm water.
2
Closed Door
Opened Door
To Next Page
Loading...
Need help?
General
