What to do if iRobot Vacuum Cleaner Roomba shows error 5?
If your iRobot Vacuum Cleaner Roomba displays error 5, the side wheel is stuck. Clean the side wheels of hair and debris. Push the wheels in and out, and check that they both turn freely. You may also want to start Roomba in a new location.
How to fix iRobot Vacuum Cleaner Roomba error 2?
If your iRobot Vacuum Cleaner Roomba shows error 2, this means the extractors can’t turn. Remove and clean the extractors and their caps. Also, clean the side wheels of any hair or debris.
What to do if iRobot Vacuum Cleaner Roomba shows error 6?
If your iRobot Vacuum Cleaner Roomba displays error 6, it means that its cliff sensors are either dirty, it is hanging over a drop, or it's stuck on a dark surface. If Roomba is stuck, start it in a new location. If it's not stuck, wipe its cliff sensors with a dry cloth and then start it in a new location.
Why does my iRobot Vacuum Cleaner Roomba say error 1?
Error 1 on your iRobot Vacuum Cleaner Roomba indicates that it may be stuck with a wheel hanging down. First, make sure Roomba's wheels are firmly on the floor. If it remains stuck, try starting it in a new location. If it's not stuck, clean any hair and debris from its side wheels, push the wheels in and out, and ensure they both turn freely.
What to do if iRobot Vacuum Cleaner thermal protector operates?
If the thermal protector operates in your iRobot Vacuum Cleaner, unplug the unit and allow it to cool for 30 minutes. Clear any obstructions from the evacuation port and evacuation tube, then plug the unit back in.
What to do if iRobot Roomba has a leak or clog in the dock evacuation path?
If your iRobot Vacuum Cleaner has a leak or clog in the dock evacuation path, ensure the canister lid is pushed down and firmly sealed. Manually empty the bin by holding the clean button on your robot down for 2-5 seconds. Also, remove any debris from the port on the bottom of your robot and dirt disposal. Unplug the dirt disposal from the wall, place it on its side, and inspect the debris evacuation tube for debris. If necessary, remove the tube to clear any debris.
How to fix the main brushes if they cannot turn in iRobot Vacuum Cleaner?
If the main brushes of your iRobot Vacuum Cleaner cannot turn, turn Roomba over and remove the brush guard by pushing the two yellow tabs. Remove the brushes, clear any obstructions, and replace them.
How to fix the side brush if it cannot turn in iRobot Vacuum Cleaner?
If the side brush of your iRobot Vacuum Cleaner cannot turn, turn it over and check if something is wrapped around the side brush. Remove the side brush with a screwdriver and check for any string or hair that may be wrapped around it.
Why my iRobot Roomba does not charge?
If your iRobot Vacuum Cleaner won't charge, ensure that the power supply is correctly connected to the wall, to the Home Base, and to Roomba. When plugged in, Roomba’s charger and Home Base will each show a solid green light.
Why is my iRobot Roomba not picking up debris?
If your iRobot Vacuum Cleaner is not picking up debris, the bin may be full. Empty the bin and clean the brushes.
General| Brand | iRobot |
|---|---|
| Model | Roomba |
| Category | Vacuum Cleaner |
| Language | English |
Core safety guidelines for operating the Roomba robot.
Specifies limitations and precautions for Roomba usage.
Instructions and warnings related to charging the Roomba battery.
Further safety rules for operating Roomba in various environments.
Guidance on first-time setup, turning Roomba on/off, and basic use.
Advice on maintaining Roomba for best cleaning results.
Tips for extending battery life and proper storage.
Process for optimizing cleaning in homes with shedding pets.
Identifies main parts visible from the top of the Roomba.
Explains the function of various buttons and indicator lights.
Identifies main parts visible from the bottom of the Roomba.
Details the components of the Roomba's cleaning head.
Step-by-step guide to selecting the desired language for messages.
Explains different cleaning paths like Spiralling, Wall Following, and Room Crossing.
Describes Clean Mode, Spot Mode, and Scheduled Cleaning Mode.
Details the technologies behind Roomba's cleaning efficiency.
How Roomba handles different floor types and obstacles.
Tips for extending battery life and proper storage.
Information on how to charge Roomba and understand charging indicators.
How to use the Virtual Wall to confine Roomba to specific areas.
Instructions for installing batteries in the Virtual Wall accessory.
How the Lighthouse guides Roomba through multiple rooms.
How the Lighthouse acts as a barrier to block areas.
Guide to creating a protective zone around pet bowls.
How Roomba uses the Home Base to charge and return.
Recommendations for optimal placement of the Home Base.
Instructions for using the remote to control Roomba functions.
Overview of controlling Roomba wirelessly with the command centre.
Step-by-step guide to setting the correct time on Roomba.
How to program Roomba for automatic cleaning times.
How to check, remove, or modify programmed cleaning schedules.
How to switch between 12-hour and 24-hour clock formats.
Table outlining maintenance frequency for different Roomba components.
Instructions for emptying the bin and cleaning the filter.
Guide to cleaning Roomba's various sensors and contact points.
Instructions for removing and cleaning the front wheel and side brush.
Lists common Roomba error messages and their resolutions.
Explains blinking patterns and error messages related to charging.
How to reset Roomba's software and clear schedules.
Identifies components that can be replaced and their order of access.
Detailed instructions for safely removing and reinstalling the Roomba battery.
How to register Roomba to activate warranty and access exclusive benefits.
Lists directives and standards Roomba complies with.
Information on how to contact iRobot Customer Care in the US and Canada.
Online resources and contact information for support outside the US and Canada.
To Next Page
