INSTALLATION
INSTRUCTIONS
BBR048
RAID BULL BAR TO SUIT NISSAN NAVARA NP300
Series 1-4
This product has been tested for airbag compatibility
and therefore the mounting system MUST NOT be modified
©Copyright 2024 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
Document Number: BBR048/260424
5 Hours
Approximately
No Bumper
Cut Required
SAFETY WARNING
Ironman 4X4 requires you read and understand the safety and pre-install
directions on page 2 and 3 before commencing installation of this product.
Bar Weight: 80Kgs (177Lbs)
NOTE
Some images contained in these instructions are generic and are
a representation of the actual model and/or parts used. Some steps
may also show parts out of sequence to the instructional steps.
Need help?
General
To Next Page
