INSTALLATION
INSTRUCTIONS
BBC080 / BBCD080
BULL BARS TO SUIT MAZDA BT50
2020+
5 Hours
Approximately
SAFETY WARNING
Ironman 4X4 requires you read and understand the safety and pre-install
directions on page 2 and 3 before commencing installation of this product.
NOTE
Some images contained in these instructions are generic and are
a representation of the actual model and/or parts used. Some steps
may also show parts out of sequence to the instructional steps.
This bull bar requires parker/indicator lights. These are not included and must be purchased separately.
Document Number: BBC_BBCD080/300424
This product has been tested for airbag compatibility
and therefore the mounting system MUST NOT be modified
©Copyright 2024 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
Need help?
General
To Next Page
