Set Time and/or Date
1. Turn the control dial to Date/Time .
2. Press the
or button to adjust the hour.
3. Press the
button to advance to the next eld.
4. Repeat steps 2 and 3 to set the current minutes, month, day and year.
Set Station Run Time Duration
1. Turn the control dial to Station Times .
2. Press the
button to select the desired program to edit.
3. Press the
or button to set the run time from 1–240 minutes.
4. Press the
button to select the next station.
5. Repeat steps 3 and 4 to set all stations as needed in the program.
Note: Select - - - (dashes) to remove a station from the program.
Set Program Start Times
1. Turn the control dial to Start Times .
2. Press the
button to select the desired program to edit.
3. Press the
or button to set the desired start time. Select - - - (dashes) to remove.
4. Press the
button to select the next start time.
5. Repeat steps 3 and 4 to set another start time. Each program can have up to 3 start times.
Set Calendar Day Watering Schedule
1. Turn the control dial to Water Days .
2. Press the
button to select the desired program to edit.
3. Press the
or button to select (ON) or (OFF).
4. Press the
button to select the next day of the week.
5. Repeat steps 3 and 4 to set the remaining days of the week.
Set Interval Watering Schedule
1. Turn the control dial to Interval .
2. Press the
button to select the desired program to edit.
3. Press the
or button to select the desired day interval (01-31).
Note: Select - - - (dashes) to deactivate Day Interval.
4. Press the
button to advance to TODAY eld.
5. Press the
or button to set the current day of the interval.
Set Odd or Even Watering Schedule
1. Turn the control dial to Odd/Even.
2. Press the
button to select the desired program to edit.
3. Press the
or button to select ODD, EVEN or - - - (dashes) to deactivate schedule.
Special Functions
1. Turn the control dial to Special Special Functions.
2. Press the
button to select the desired program to edit (if applicable).
3. Press the
button to select the desired special function (see below).
4. Use the
or button to modify the selection.
100% - Water Budget menu. Select between OFF and 200% in 10% increments.
HH:MM - Select the run time format between Hours:Minutes (HH:MM) or Minutes (MMM).
ENG - Select the desired display language.
12H - Select either 12-hour or 24-hour time format.
CLR - Select the program(s) to clear/erase. Press
the button twice to clear.
XP Y - Enable (Y) or Disable (N) the Accessory Port.
RS Y - Enable (Y) or Disable (N) the SENSOR terminals.
VX.XX - Displays the controller’s rmware version.
KD2
TM
Quick Reference Card
To Next Page
Need help?
General
