To Next PageTo Next Page
Need help?Do you have a question about the Irritrol KwikDial and is the answer not in the manual?
General| Model | KwikDial |
|---|---|
| Mounting | Indoor/Outdoor |
| Rain Sensor Compatibility | Yes |
| Cycle and Soak | Yes |
| Rain Delay | 1 to 7 days |
| Manual Watering | Yes |
| Zones | 4, 6, 8, 12 |
| Stations | 4, 6, 8, 12 |
| Programs | 3 independent programs |
| Watering Schedule | 7-day calendar |
| Power Source | 120 VAC |
| Backup Battery | 9V battery |
| Watering Duration | 1 minute to 12 hours |
Guide for physically mounting the controller unit.
Wiring instructions for sprinkler valves to controller terminals.
Procedure for wiring a pump start relay to the system.
Connecting an optional rain sensor to suspend watering.
Instructions for safely connecting power to the controller.
How to set the controller's current date and time.
Guidance on preparing watering schedules before programming.
Information on the controller's permanent memory feature.
How to set specific days of the week for watering.
Setting watering days based on a specified interval.
Configuring multiple start times for watering programs.
Defining the operating time for each watering station.
How the controller runs programmed watering schedules automatically.
Overview of manual control options for stations and programs.
Running a quick test of each station's operation.
Temporarily delaying all automatic watering operations.
Procedure for completely shutting down the controller.
Manually running a single station without regard to programmed time.
Manually running stations with temporary run times.
Manually starting and running programmed watering cycles.
Adjusting watering run times by percentages for programs.
Changing the display format for station run times.
Selecting the display language for the controller interface.
Choosing between 12-hour and 24-hour clock display.
Clearing programmed settings for programs or the entire controller.
Activating or deactivating the expansion port for remote control.
