Need help?Do you have a question about the Irritrol Dial Series and is the answer not in the manual?
General| Start Times | 3 start times per program |
|---|---|
| Enclosure | Indoor/Outdoor |
| Rain Sensor Compatible | Yes |
| Master Valve/Pump Start | Yes |
| Cycle and Soak | Yes |
| Manual Operation | Yes |
| Enclosure Rating | NEMA 3R |
| Zones | 4, 6, 12 |
| Programs | 3 independent programs |
| Watering Schedule | 7-day calendar |
| Power Source | AC power |
| Backup Battery | 9V battery |
| Mounting | Wall mount |
| Programming | Dial |
| Water Budget | 10% to 200% |
| Watering Duration | 1 minute to 6 hours per zone |
| Backup Memory | Non-volatile memory |
Details on the function dial, program select switch, advance, and on/off buttons for controller operation.
Information on the digital display, program LEDs, and water budget indicator for monitoring controller status.
Covers water budget, program erase, options, and time/day/station settings for programming watering schedules.
Explains valve testing, rain off, auto run, semi-automatic modes, terminal strip, battery, transformer, and short wire.
Guidelines for choosing an appropriate location and mounting the controller securely.
Instructions for safely connecting the controller to the electrical power supply.
Procedures for connecting and testing the controller's valve wiring.
Details on connecting pump start relays and the function of the backup system.
Guidance on installing and connecting rain off and start sensors.
Explanation of how the electronic circuit breaker protects against shorts.
Guidance on creating effective watering plans and understanding watering cycles.
Instructions for setting the controller's current time, day, and managing program cycles.
Procedures for setting station watering times and selecting watering days.
Details on setting, displaying, and cancelling watering start times, including Program B.
How to manually turn stations on, off, or stop current watering.
Instructions for temporary rain off and programmable rain off settings.
Adjusting watering times by a percentage for seasonal needs.
Configuring the controller for a 6-day watering calendar instead of 14-day.
Options to program watering times in seconds or hours for program B.
Setting up loop watering cycles and programming delays between cycles.
Diagnosing and resolving issues with valves not turning on or staying on.
Addressing problems like cannot program, skipped cycles, or no display.
Troubleshooting 'FUSE' displays, 'Err 1/Err 2', and other circuit-related faults.
To Next Page