Step 4 – Press the button to accept the changes. The display will now reect the new date.
While in SET DATE mode, you can advance to the SET TIME mode by pressing
the or button.
Step 5 – Return the Function dial to AUTO/RUN position to exit SETUP.
SETUP – Current Time
Set Current Time
Step 1 – Place the Function Dial to the SETUP position.
Step 2 – Press the or button to access the SET TIME screen or simply press the button.
Step 3 – Enter the Hour, Minutes and Seconds in H MM format. Enter the H MM for PM time.
International setting follows the 24-hour format.
Example: For 1:21pm, enter 0121
for U.S. format and 1321 for International format.
Step 4 – Press the button to accept the changes. The display will now reect the new time.
While in SET TIME mode, you can advance to the SET LANGUAGE screen by pressing the NEXT
button or go back to SET DATE by pressing the BACK button.
Step 5 – Return the Function dial to AUTO/RUN position to exit SETUP.
Power On / Reset Mode
MC-E will initiate the operating system and reload all saved data in the memory for stable operation every time the
controller is powered up. Place the Function Dial in the Auto/Run position for normal operation.
Initial Display Auto Run Mode Display
System SETUP
The SETUP function allows you to modify the following MC-E parameters:
• Time/Date Format • Current Date
• Current Time • Security Password
• Enable/Disable Master Valve
SETUP – Time/Date Format
Set Time/Date Format to International or U.S.
Step 1 – Place the Function dial to the SETUP position.
Step 2 – The default Time and Date is set to the U.S. format. To set the date to International format (Day/Month/Year),
press . To return to the default U.S. format, press .
Step 3 – Press the or button to navigate to other SETUP menu or return the Function dial to AUTO/RUN
position to exit SETUP.
SETUP – Current Date
Set Current Date
Step 1 – Place the Function dial to the SETUP position.
Step 2 – Press the or button to access the SET DATE screen or simply press the button.
Step 3 – Enter the Month, Date and Year in MM DD YY (U.S. format). If the MC-E is operating in International
format, enter the Date rst, the Month second and the year last (DD MM YY).
Example: For December 20, 2010, press the 122010 for U.S. format and 201210 for Internatinal format.
U.S. format
International format
To Next Page
Loading...
Need help?
General
