1. Place the Function switch in the Set Programs position.
2. Place the Program switch to select A, B or C.
3. Turn the Dial to the Start Time 1 position.
4. Use the and buttons to set the start time.
Hold the button down to scroll. The display will continuously scroll
through the minutes and hours.
Note: To turn a Start Time OFF, select one increment past 11:59
or 5:59 (AM or PM).
5. Repeat steps 3 and 4 for the remaining program cycle start times
you wish to set.
6. Turn the Dial to the Current Time position when finished.
Three types of watering schedules are available for each Program:
• Weekdays - Enables individual days of the week to be set to water.
• Skip Days - Sets watering days by frequency. For example, every
day (01), every-other-day (02) etc.
• Odd/Even Date - Sets watering days by Odd or Even calender
day number.
To Set a Weekday Schedule:
1. Place the Function switch in the Set Programs position.
2. Place the Program switch to select A, B or C.
3. Turn the Dial to select the Schedule (Sun–Sat) weekday posi-
tion you wish to set.
4. Use the and buttons to select ON of OFF.
5. Repeat steps 3 and 4 for the remaining days you wish to set for
the selected program.
6. Turn the Dial to the Current Time position when finished.
Setting the Watering Day Schedule
21
66767_RainDial 0428A 3/28/07 2:25 PM Page 21
To Next Page
Loading...
Need help?
General
