Doc. CEI12166 Rev. 1 Pag. 12 Of 47
Main contact lines mean:
. Thin line = Open contact;
. Thicker line = pre-insertion resistor closed;
. Thickest line = Closed contact.
Auxiliary lines are: Thin = Open; Thick = Closed.
Next lines are the coil currents profiles: they are four if the option is installed.
The time base is the test duration, with a scale that corresponds to the test time.
2.3.5.2 Trigger options
The selection defines the reference for time measurements: pressing it, the following window is
displayed.
To Next Page
Loading...
