Riding Basics
Wear a helmet, elbow pads, and knee pads in case of
falls and injuries either you are a beginner learning to
ride or you are a seasoned rider.
Turn the power on, and check the battery
level indicator.
1
Stand with one foot on the deck and one
foot on the ground. Scoot yourself with the
foot on the ground.
2
Release the accelerator and the kinetic
energy recovery system (KERS) initiates
automatically to brake slowly; And squeeze
the brake lever for a sudden brake.
4
When the scooter starts to move forward,
put both feet on the deck and press the
accelerator. (The accelerator initiates once
the speed exceeds 3 mph.)
3
Tilt your body to the steering direction as
you turn, and slowly turn the handlebar.
5
11
O
To Next Page
Loading...
