iScooter iX4 - Page 8

1. Open the electric lock 2. Press the power button
to turn on the scooter
3. 3 speed levels:
10 km/h, 15 km/h, 25 km/h
6. Press Horn button and the
display reads P20 (cruise
control off); press S to turn on
cruise control; press M to
return to P20
7. Press Horn button and the
display reads P30(low-speed
mode); press S to switch to
P31(high speed mode);
press M to return to P30
8. Press the power button to
save the settings to high
speed mode: 15 km/h, 30
km/h, 45 km/h
Display Content
06
4. Press and hold Power
and horn buttons for 5-8
seconds to enter mode
setting interface
5. Press Horn button and the
display reads "P10" (non-zero
start); press S button and the
display reads "P11"(zero-start);
press M button to return to P10
Note: After mode is set,
wait about 5 seconds
and the mode setting will
be saved automatically
and it will exit the interface.