9
Start
Brake
Please avoid emergency brake which will break the tires and cause slip.
1.Practice outside and choose good road condition.
2.Open the scooter according to the user manual.
3.Adjust the handlebar to the height that fits you.
4.Open the seat and adjust it to a suitable height.
5.Lock the quick release clamp.
Riding
1.Press for 3 seconds. Check the mode before riding.
2.Push your scooter forward and pull the trigger throttle slowly at the
same time, and the scooter will start going forward.
3.Please set the riding mode. Speed can be controlled by the throttle.
4.Please release the throttle or squeeze the brake lever to slow down if
necessary.
Stop riding
Slow down, squeeze the brake lever lightly, put one of your feet on the
ground after your scooter stops.
Notice:
Please do not ride the scooter on rainy days or in freezing weather, or
else it will cause danger.
Riding operation
To Next Page
Loading...
