08
Riding Basics
Wear a helmet, elbow pads, and knee pads in
case of falls and injuries either you are a
beginner learning to ride or you are a
seasoned rider.
1.Turn the power on, and check the battery
level indicator.
2.Stand with one foot on the deck and one
foot on the ground. Scoot yourself with the
foot on the ground.
3.When the scooter starts to move forward,
put both feet on the deck and press the
accelerator. (The accelerator initiates once
the speed exceeds 3 mph.)
4.Release the accelerator and the kinetic
energy recovery system (KERS) initiates
automatically to brake slowly; And squeeze
the brake lever for a sudden brake.
5.Tilt your body to the steering direction as
you turn, and slowly turn the handlebar.
To Next Page
Loading...
