iScooter iX6 - Assembly

05
Assembly
1. Open the package, take out the E-scooter
and its accessories.
2. Press the folding mechanism and lift the T-bar
upright. Push down the kickstand.
3. Cut the tapes on the handlebar.Lift the
handlebars on both sides up and slide
in to secure.(Tips: Don't tighten only
one side one time, visit www.iscooter.com for
additional help with assembly, including a
step-by-step video.)
4. Open the adjustable lock, adjust the handlebar
to the height you needed, then close the lock.