(1). The Radiant cooktop must be installed by a properly qualified person We have our
own qualified installers Never try to install the appliance yourself.
(2).The Radiant cooktop must not be installed above refrigerators freezers, dishwashers
or tumble dryers.
(3).The wall and the area above the cooktop should be able to withstand heat.
If the cable is damaged or needs or needs replacing this should be done by an after sales
technician using the proper tools so as to avoid any accidents.
The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations
The cable must not be bent or compressed
The cable must be checked regularly and only replaced by a properly qualified person.
Black live wire L1, white live wire L2, green ground wire. The whole machine
cannot be powered on if any of the black and white wires are not contacted well.
After the troubleshooting is not a wiring problem: the hob ring does not light up or a single
burner does not light up, it may be that the hob is damaged or the power board is
damaged.
Electric ceramic stove failure:
No heating for 2 minutes after the gear is selected, an "E4" fault will be displayed.
Customer Service Email: service@iseasy.com
(Please send relevant videos and pictures to our email address, and attach your
Amazon order number. After confirming the problem, we will definitely give you a
satisfactory solution.)
Connection to power supply:
To Next Page
Loading...
