Residual heat indicator:
When the hob has been operating for some time, there will be some residual heat.
The residual heat indicator LED (Hot) warns for each cooking zone separately.
Safety systems
In order to protect the electronics from overheating if the control unit detects excessive heat it
will switch off the hotplate closest to the sensors and the letter H will appear on the display.
This hotplate can be activated when the temperature of the electronic unit returns to normal.
Each hotplate is equipped with an interior temperature limiter that switches off the hotplate if
the radiant surface is heated excessively.
If any cracks appear in the radiant surface, immediately disconnect it from the mains. Do not
use any part of the cooktop until a new radiant surface has been fitted.
Automatic
The hob will automatically switch off when you did not set cooking time, forgot to switch off the
hob, and did not operate the hob for two hours.
To Next Page
Loading...
