iSi Sodamaker Classic - Siphon Data; Material List; Safety Information

6 7
Safety Information.
Failure to follow these safety instructions
or any recommendation for use and care con-
stitutes misuse of iSi products and could result
in malfunction of the system and possible
personal injury and/or property damage.
——— The iSi siphon is only approved for use in
accordance with the Siphon Data and the
purposes indicated in the instructions!
——— Please read the instructions for use care-
fully to avoid operating errors and keep a
copy on hand!
——— Do not use force.
——— Store the iSi Siphon out of the reach
of children!
——— Only charge a siphon that is filled!
——— Never store or use the iSi Siphon outside of
the min. and max. operating temperatures.
——— Do not expose iSi device to direct sunlight.
——— Do not freeze iSi device or store it at below
1°C / 34°F. Do not store device in refrigera-
tor freezer compartment or deep freezer.
——— Only use a head and bottle of the same
siphon type together!
——— Never combine iSi components with
components from another brand or
manufacturer!
——— The head and the charger holder should
always be screwed on straight and com-
pletely tight, never crooked or incompletely
tightened!
——— Only use original iSi soda chargers!
——— When screwing on the charger, do so away
from others and keep face away from the
siphon; do not bend over the siphon!
EN
Siphon Data.
Max. operating
pressure PS
11 bar / 159.5 psi
Min. ope rating
temperature
1°C / 34°F
Max. ope rating
temperature
30°C / 86°F
Max. cleaning
temperature
50°C / 122°F
Max. filling volume ~ 1 L / 1 US quart
Max. number of
chargers to be used
1 iSi soda charger
How to Use For refreshing,
sparkling soda
water.
Not approved for
commercial use.
Material List.
Description Material
Bottle PEN / PP / polished
stainless steel
Device head PA, nickel-plated ABS,
POM, NBR, silicone,
nickel-plated brass,
stainless steel, PU
Riser tube / gasket Stainless steel,
silicone, POM
Measuring tube PET, silicone
Measuring tube key ABS
Charger holder PA, TPE
Technical data is subject to change without
prior notice.