02
2.1 Install the front wheel
Install the safety and ordinary washers in sequence on the front wheel axle.
Make sure the safety washers hook into the holes above the front fork
dropouts. Then, tighten the nuts with wrenches.
● Please read this manual thoroughly and follow its instructions.
● Make sure all parts are intact.
● Do not turn on the e-bike until it is fully assembled.
● If you have any questions or can't find the information you need in the manual,
please email us.
Before Assembly
1
2. Assembly Instructions
1. Find the front wheel.
2. Sit the front wheel on the front
wheel. Make sure the brake rotor is
located in the brake caliper.
2
3 4
Check if the front wheel is securely installed on the front fork.
To Next Page
Loading...
