Settings
16 User’sManual
4.1 Introduction
Instrument settings can be remotely modified with communication (COM1 and/or USB if
available) and MiQen software when connected to a PC.
4.2 MiQen software
MiQen is a software tool for complete monitoring of measuring instruments, connected to a PC
via serial or USB communication. A user-friendly interface consists of five segments: devices
management, instrument settings, real-time measurements and software upgrading.
Two versions of MiQen software are available:
− Professional edition with full functionality and supports all software functionality. CD-Key
is required for the installation.
− Standard edition, freeware edition which supports all software functionality except data
analysis.
For MT440 only standard edition applies since measurement recording and analysis is with
MT440 not supported.
Devices management
Select the instrument in a favorite’s line. Use the network explorer to set and explore the devices
network. Communication parameters of all devices and their addresses in network can be easily
set.
Instrument settings
Multi Register Edit technology assures a simple modification of settings that are organized in a
tree structure. Besides transferring settings into the instrument, storing and reading from the
setting files are also available.
Real-time measurements
All supported measurements can be captured in real time in a table form. For further processing
of the results of measurements, copying via a clipboard into standard Windows formats is
supported.
Software upgrading
Always use the latest version of software, both MiQen and software in the instrument. The
program automatically informs you on available upgrades that can be transferred from the web
site and used for upgrading.
Note
More information about MiQen software can be found in MiQen Help
system!
MiQen user interface
To Next Page
Loading...
