Iskratel Innbox E80 - Connecting a Set-Top Box

/ 
4.2 Connecting a Set-Top Box
What you need:
 The Innbox home gateway (included in the package);
 An Ethernet RJ- (included in the package);
 A set-top box (not included in the package).
Steps to follow:
 Plug one end of the Ethernet cable to one 
The ports might be pre
-configured for a specific service (data or video). If you obtain such
information from your service provider, plug the
set-top box to the designated port only.
 Plug the other end of the Ethernet cable to the Ethernet port on your set-top box.
When the Innbox home gateway is switched on and your set-top box connected, pay attention to
the INTERNET light indicator. The light indicator should be on uninterruptedly or blinking.
For instructions on how to connect or use your set
-top box, please refer to the user
documentation of your set
-top box.
If you have properly connected the set-top box device to your TV set, you can start using the TV and
video services immediately.
i
i
© Copyright  Iskratel. All rights reserved.