ISON IS-DG500 Series User Manual

33
3.6 I.A. Ring Group Mode Commands
3.6.1 I.A. Ring protect
Description
To configure ring protection.
Syntax
ring protect
Parameter
None
3.6.2 role {master| slave}
Description
Set role to ring group.
Syntax
ring protect role {master| slave}
Parameter
None
3.6.3 id <ring-id>
Description
Set ring group ID.
Syntax
ring protect <ring-id>
Parameter
Name
Description
<ring-id>
Ring ID.
Valid values: 0~255
Type: Mandatory
3.6.4 mode {enable|disable}
Description
Enable / disable ring group.
Syntax
mode enable
mode disable
Parameter
None
3.6.5 node<1|2> interface GigabitEthernet <portNo>}
Description
Set interface of ring protection node
Syntax
node1 interface GigabitEthernet <portNo>
node2 interface GigabitEthernet <portNo>
Parameter
Name
Description
<portNo>
Valid values: 1~10.
Type: Mandatory
3.6.6 guardtimer <time>
Description
Set ring guard time
Syntax
guardtimer <time>
Parameter
Name
Description
<time>
Guard time, unit :second
Valid values: 10~3600
Type: Mandatory
3.6.7 group<number>
Description
Entry ring group interface
Syntax
group<number>
Parameter
Name
Description
<number>
Ring group index
Valid values: 1~3
Type: Mandatory

ISON IS-DG500 Series Specifications

General

Brand	ISON
Model	IS-DG500 Series
Category	Network Router
Language	English